M120 Multiservice Edge Router Hardware Guide
Table 27: AC Power Cord Specifications
Country
Australia
China
Europe (except Denmark,
Italy, Switzerland, and
United Kingdom)
Italy
Japan
North America
United Kingdom
232
Table 27 on page 232 provides specifications and Figure 96 on page 232 depicts the plug
on the AC power cord provided for each country or region.
Model Number
CBL-M-PWR-RA-AU
CBL-M-PWR-RA-CH
CBL-M-PWR-RA-EU
CBL-M-PWR-RA-IT
CBL-PWR-RA-JP15
CBL-M-PWR-RA-JP
CBL-PWR-RA-US15
CBL-M-PWR-RA-TWLK-US
CBL-M-PWR-RA-UK
Figure 96: M120 AC Plug Types
NOTE: If you plan to operate a maximally configured AC-powered router, we
recommend that you provision at least 33 A @ 240 VAC (11 A per inlet) for
the system, or at least 11 A maximum @ 240 VAC for each power supply. Use
a facility circuit breaker rated for 20 A, 125/250 VAC minimum for each AC
power supply. Doing so enables you to operate the router in any configuration
without upgrading the power infrastructure.
In North America and Japan, use both inlets for 125 VAC.
Electrical Specification
240 VAC, 50 Hz AC
220 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
125 VAC, 50 or 60 Hz AC
220 VAC, 50 or 60 Hz AC
120 VAC, 60 Hz AC
250 VAC, 60 Hz AC
240 VAC, 50 Hz AC
Copyright © 2010, Juniper Networks, Inc.
Plug Type
SAA/3
PSB-10
CEE 7/7
CEI 23-16/VII
JIS 8303
Two required
NEMA L6-20P
One required
NEMA 5-15P
Two required
NEMA L6-20P
One required
BS89/13