Figure 33: Removing A Cfpc Before Installing The M120 Router - Juniper M120 Hardware Manual

M120 Multiservice Edge Router Hardware Guide
Related
Documentation
68
Pull the lower end of the ejector lever away from the CFPC faceplate to unseat the
3.
CFPC.
Continue to pull the lever toward you and slide the CFPC straight out of the card cage
4.
halfway.
Place one hand around the front of the CFPC and the other hand under it to support
5.
it. Slide the CFPC completely out of the chassis, and place it on the antistatic mat or
in the electrostatic bag.
CAUTION: When the CFPC is out of the chassis, do not hold it by the ejector
handle, bus bars, or edge connectors. They cannot support its weight.
Place each individual CFPC in an individual electrostatic bag or on its own
antistatic mat on a flat, stable surface.

Figure 33: Removing a CFPC Before Installing the M120 Router

M120 Router Chassis Description on page 6
M120 Router Physical Specifications on page 225
M120 Chassis Lifting Guidelines on page 195
General Safety Warnings for M Series, MX Series, and T Series Routers on page 190
Copyright © 2010, Juniper Networks, Inc.