Figure 92: Installing An M120 Dc Power Supply - Juniper M120 Hardware Manual

Copyright © 2010, Juniper Networks, Inc.
NOTE: For information about connecting to external DC power sources,
see "M120 DC Power, Connection, and Cable Specifications" on page 234.
Switch the power switch on the power supply faceplate to the on position (
13.
that the status LED on the power supply faceplate blinks, then lights steadily
approximately one minute after you switch on the power switch.

Figure 92: Installing an M120 DC Power Supply

Chapter 14: Replacing M120 Hardware Components
). Verify
|
181