Host Subsystem Leds On The M120 Craft Interface; Table 9: External Clock Leds On The M120 Craft Interface; Table 10: M120 Host Subsystem Leds - Juniper M120 Hardware Manual

Multiservice edge router
Hide thumbs Also See for M120:
Table of Contents

Advertisement

M120 Multiservice Edge Router Hardware Guide
Related
Documentation

Host Subsystem LEDs on the M120 Craft Interface

26
Two bi-color LEDs in the lower left and right corners of each port indicate port status.
The LED on the lower left as you face the craft interface indicates whether an external
clock source is present. The LED on the lower right as you face the craft interface indicates
if there is a fault. Table 9 on page 26 describes the external clock port LEDs,

Table 9: External Clock LEDs on the M120 Craft Interface

Label
Color
A
Green
B
Yellow
(Fault LED)
RJ-45 Connector Pinouts for the M120 Routing Engine ETHERNET Port on page 247
RJ-45 Connector Pinouts for the Routing Engine AUX and CONSOLE Ports on page 248
RJ-45 Connector Pinouts for the External Clock Ports on page 248
Each host subsystem has three LEDs, located in the middle of the craft interface, that
indicate its status. The LED labeled
installed in slot
CB0
. The LED labeled
CB installed in slot
.Table 10 on page 26 describes the functions of the host subsystem
CB1
LEDs.

Table 10: M120 Host Subsystem LEDs

Label
Color
Green
RE MASTER
Green
RE STATUS
Red
Green
CB STATUS
Red
State
Description
On steadily
External clock source is plugged into the port,
physical signal is present.
Off
No external clock source is plugged into the port, no
physical signal is present.
On steadily
Fault condition; external reference clock frequency
is out of the tolerance threshold deviation of 10
parts-per-million (PPM).
Off
External clock signal is validated or no external clock
source is plugged into the port.
indicates the status of the Routing Engine and CB
0
1
indicates the status of the Routing Engine and
State
Description
On steadily
Routing Engine is the master.
On steadily
The Routing Engine is functioning.
On steadily
The Routing Engine has failed.
On steadily
The board is online.
Blinking
The board is transitioning online/offline.
On steadily
The CB has failed.
Copyright © 2010, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents