Table of Contents
Advertisement
11.2 Changing the OpenWBEM
When OpenWBEM CIMOM (owcimomd) starts, it reads it run-time configuration from
the openwbem.conf file. The openwbem.conffile is located in the /etc/
openwbem directory.
Any setting that has the options commented out with a semicolon (;) or pound sign (#)
uses the default setting.
When making changes to this file, you can use any text editor that saves the file in a
format that is native to the platform you are using.
You can change any of the settings in the openwbem.conf file. This section discusses
the following configuration settings:
•
Section 11.2.1, "Changing the Authentication Configuration"
•
Section 11.2.2, "Changing the Certificate Configuration"
•
Section 11.2.3, "Changing the Port Configuration"
•
Section 11.2.4, "Changing the Default Logging Configuration"
•
Section 11.2.5, "Configuring Debug Logging"
•
Section 11.2.6, "Configuring Additional Logs"
11.2.1 Changing the Authentication
When changing the Authentication configuration, there are several things that you can
control:
• Who can access the CIMOM
• What authentication module is used
234
Installation and Administration
CIMOM Configuration
Configuration
(page 234)
(page 242)
(page 243)
(page 244)
(page 252)
(page 253)
Advertisement
Table of Contents
Troubleshooting
