Ocfs2 Packages - Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual

Command
/etc/init.d/o2cb offline
ocfs2
/etc/init.d/o2cb unload
/etc/init.d/o2cb start
ocfs2
/etc/init.d/o2cb stop
ocfs2

13.1.6 OCFS2 Packages

The OCFS2 kernel module ( ocfs2) is installed automatically in SUSE Linux Enterprise
Server 10 and later. To use OCFS2, use YaST (or the command line if you prefer) to
install the ocfs2-tools and ocfs2console packages on each node in the cluster.
1 Log in as the root user or equivalent, then open the YaST Control Center.
2 Select Software > Software Management.
3 In the Search field, enter
ocfs2
The software packages ocfs2-tools and ocfs2console should be listed
in the right panel. If they are selected, the packages are already installed.
Description
At least one node in the cluster must be active for the
cluster to be online.
Offlines the cluster named ocfs2
Unloads the O2CB modules and in-memory file systems
If the cluster is set up to load on boot, starts the cluster
named ocfs2 by loading o2cb and onlining the cluster
At least one node in the cluster must be active for the
cluster to be online.
If the cluster is set up to load on boot, stops the cluster
named ocfs2 by offlining the cluster and unloading the
O2CB modules and in-memory file systems
Oracle Cluster File System 2 273