Figure 34.10 DHCP Server: Interface Configuration for Dynamic DNS
Network Interface Configuration
To define the interfaces where the DHCP server should listen and to adjust the
firewall configuration, select Advanced > Interface Configuration from the expert
configuration dialog. From the list of interfaces displayed, select one or more that
should be attended by the the DHCP server. If clients in all of the subnets should
be able to communicate with the server and the server host also runs a firewall,
adjust the firewall accordingly. To do so, select Adapt Firewall Settings. YaST
then adjusts the rules of SuSEfirewall2 to the new conditions (see
"DHCP Server: Network Interface and Firewall"
return to the original dialog by selecting Ok.
646
Installation and Administration
Figure 34.11,
(page 647)), after which you can