Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 953

Choose one of the repair modes as described above and proceed with the system repair
as outlined in the following sections.
Automatic Repair
To start the automatic repair mode of YaST System Repair, proceed as follows:
1 Insert the first installation medium of SUSE Linux Enterprise into your CD or
DVD drive.
2 Reboot the system.
3 At the boot screen, select Installation.
4 Select the language and click Next.
5 Confirm the license agreement and click Next.
6 In System Analysis, select Other > Repair Installed System.
7 Select Automatic Repair.
YaST now launches an extensive analysis of the installed system. The progress
of the procedure is displayed at the bottom of the screen with two progress bars.
The upper bar shows the progress of the currently running test. The lower bar
shows the overall progress of the analysis. The log window in the top section
tracks the currently running test and its result. See
Mode" (page 936). The following main test runs are performed with every run.
They contain, in turn, a number of individual subtests.
Figure 51.2, "Automatic Repair
Common Problems and Their Solutions 935