Table of Contents
Advertisement
Figure 8.7 Adding a PCI ID
To add an ID, click Add and select how to assign it: by selecting a PCI device from a
list or by manually entering PCI values. In the first option, select the PCI device from
the provided list then enter the driver or directory name. If the directory is left empty,
the driver name is used as the directory name. When assigning PCI ID values manually,
enter the appropriate data to set up a PCI ID. Click OK to save your changes.
To edit a PCI ID, select the device driver from the list and click Edit. Edit the information
and click OK to save your changes. To delete an ID, select the driver and click Delete.
The ID immediately disappears from the list. When finished, click OK.
8.5.9 Power Management
The System > Power Management module helps you work with saving energy technolo-
gies. It is especially important on laptops to extend their operational time. Find detailed
information about using this module in
Section 28.6, "The YaST Power Management
Module"
(page 524).
156
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
