Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 476

23.9.7 CUPS Browsing: Deleting Print Jobs
If a CUPS network server broadcasts its queues to the client hosts via browsing and a
suitable local cupsd is active on the client hosts, the client cupsd accepts print jobs
from applications and forwards them to the cupsd on the server. When cupsd accepts
a print job, it is assigned a new job number. Therefore, the job number on the client
host is different from the job number on the server. Because a print job is usually for-
warded immediately, it cannot be deleted with the job number on the client host, because
the client cupsd regards the print job as completed as soon as it has been forwarded
to the server cupsd.
To delete the print job on the server, use a command such as lpstat -h
print-server -o to determine the job number on the server, provided the server
has not already completed the print job (that is, sent it completely to the printer). Using
this job number, the print job on the server can be deleted:
cancel -h print-server queue-jobnnumber
23.9.8 Defective Print Jobs and Data
Print jobs remain in the queues and printing resumes if you switch the printer off and
on or shut down and reboot the computer during the printing process. Defective print
jobs must be removed from the queue with cancel.
If a print job is defective or an error occurs in the communication between the host and
the printer, the printer prints numerous sheets of paper with unintelligible characters,
because it is unable to process the data correctly. To deal with this, follow these steps:
1 To stop printing, remove all paper from ink jet printers or open the paper trays
2 The print job may still be in the queue, because jobs are only removed after they
458 Installation and Administration
Transfer Errors
of laser printers. High-quality printers have a button for canceling the current
printout.
are sent completely to the printer. Use lpstat -o or lpstat -h
print-server -o to check which queue is currently printing. Delete the
print job with cancel queue-jobnumber or cancel -h
print-server queue-jobnumber.