Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 173

to delete the beginning of this volume. For example, in the VG system and PV /dev/
sda2, do this with the command dd if=/dev/zero of=/dev/sda2 bs=512
count=1.
WARNING: File System for Booting
The file system used for booting (the root file system or /boot) must not be
stored on an LVM logical volume. Instead, store it on a normal physical partition.
8.5.8 PCI Device Drivers
TIP: IBM System z: Continuing
For IBM System z, continue with
(page 157).
Each kernel driver contains a list of device IDs of all devices it supports. If a new device
is not in any driver's database, the device is treated as unsupported, even if it can be
used with an existing driver. With this YaST module from System section, you can add
PCI IDs. Only advanced users should attempt to use this YaST module.
Section 8.5.12, "System Services (Runlevel)"
System Configuration with YaST 155