Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 582

3 To disable DHCP-driven host name configuration, deselect Change Hostname
4 Enter Hostname and, if it is needed, Domain Name.
5 To disable DHCP driven updates of the name server list, deselect Update Name
6 Enter the name servers and domain search list.
7 Click OK.
8 Click Next.
9 To activate the configuration, click Finish.
Configuring Routing
To make your machine communicate with other machines and other networks, routing
information must be given to make network traffic take the correct path. If DHCP is
used, this information is automatically provided. If a static setup is used, this data must
be added manually.
1 Select a card from the list of detected cards in the YaST network card configura-
2 In the Address tab, click Routing.
3 Enter the IP of the Default Gateway.
4 Click OK.
5 Click Next.
6 To activate the configuration, click Finish.
Adding Special Hardware Options
Sometimes a module of a network card needs special parameters to work correctly. To
set them with YaST, proceed as follows:
564 Installation and Administration
via DHCP.
Servers and Search List via DHCP.
tion module and click Edit.