Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 332

Table of Contents

Advertisement

Information about device name resolution is obtained from the file /usr/share/
pci.ids. PCI IDs not listed in this file are marked "Unknown device."
The parameter -vv produces all the information that could be queried by the program.
To view the pure numeric values, use the parameter -n.
16.3.2 USB Devices: lsusb
The command lsusb lists all USB devices. With the option -v, print a more detailed
list. The detailed information is read from the directory /proc/bus/usb/. The fol-
lowing is the output of lsusb with these USB devices attached: hub, memory stick,
hard disk, and mouse.
linux:/ # lsusb
Bus 004 Device 007: ID 0ea0:2168 Ours Technology, Inc. Transcend JetFlash \
2.0 / Astone USB Drive
Bus 004 Device 006: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE \
Adapter
Bus 004 Device 005: ID 05e3:0605 Genesys Logic, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 046d:c012 Logitech, Inc. Optical Mouse
Bus 001 Device 001: ID 0000:0000
16.3.3 Information about a SCSI Device:
The command scsiinfo lists information about a SCSI device. With the option -l,
list all SCSI devices known to the system (similar information is obtained via the
command lsscsi). The following is the output of scsiinfo -i /dev/sda,
which gives information about a hard disk. The option -a gives even more information.
linux:/ # scsiinfo -i /dev/sda
Inquiry command
---------------
Relative Address
Wide bus 32
Wide bus 16
Synchronous neg.
314
Installation and Administration
scsiinfo
0
0
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suse linux enterprise server 10

Table of Contents