Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 63

2 Boot the target system using the first CD or DVD of the SUSE Linux Enterprise
media kit.
3 When the boot screen of the target system appears, use the boot options prompt
to set the appropriate VNC options and the address of the installation source.
This is described in detail in
lation" (page 72).
The target system boots to a text-based environment, giving the network address
and display number under which the graphical installation environment can be
addressed by any VNC viewer application or browser. VNC installations announce
themselves over OpenSLP and can be found using Konqueror in service:/
or slp:/ mode.
4 On the controlling workstation, open a VNC viewing application or Web
browser and connect to the target system as described in
Installation" (page 77).
5 Perform the installation as described in
(page 17). Reconnect to the target system after it reboots for the final part of the
installation.
6 Finish the installation.
4.1.2 Simple Remote Installation via
VNC—Dynamic Network Configuration
This type of installation still requires some degree of physical access to the target system
to boot for installation. The network configuration is made with DHCP. The installation
itself is entirely controlled from a remote workstation using VNC to connect to the in-
staller, but still requires user interaction for the actual configuration efforts.
For this type of installation, make sure that the following requirements are met:
• Remote installation source: NFS, HTTP, FTP, or SMB with working network
connection
• Target system with working network connection
Section 4.4, "Booting the Target System for Instal-
Chapter 3, Installation with YaST
Section 4.5.1, "VNC
Remote Installation 45