Setup Intent Wizard; Welcome Panel - Novell ADMINSTUDIO 9.5 User Manual

Setup Intent Wizard

Although an installation may have intended to install certain files, these files sometimes may not be installed—often
because the files already exist on the target machine (either as the same version or a newer version). These files,
although not installed or updated, are needed for the product to execute properly when the setup is run on a
system that does not already have these files.
The Setup Intent Wizard allows you to scan a setup to identify files that may not have been captured during
repackaging—effectively recognizing the installation's intent for these files.
Tip • Any files found will be displayed in Repackager in a different color (as specified in the Color tab of the
Options dialog box).
The Setup Intent Wizard consists of the following panels:
•

Welcome Panel

• Scanning Project Panel
• Results Panel
Welcome Panel
The first panel in the Setup Intent Wizard informs you the purpose of the Wizard, and warns you the source files for
your project must be present for successful scanning.
Figure 8-24: Setup Intent Wizard Welcome Panel
AdminStudio 9.5 User Guide
Chapter 8: Converting Legacy Installations Using the Repackager Interface
ADS-0950-UG00
Repackager Interface Reference
613