Table of Contents
Advertisement
Chapter 12: Customizing Installations Using Tuner
Configuring Package Content
Setting the NT Service Error Control Level
Task:
To set the NT service error control level:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Error Control value in the properties grid to access the pop-up menu. The possible
values are as follows:
Value
Ignore Error
Normal Error
Critical Error
Setting the NT Service Load Order Group
Task:
To set the NT service load order group:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Load Order Group value in the properties grid and modify it as needed. If this service
does not belong to a group, leave this value blank.
Setting the NT Service Overall Install Result
Task:
To set the NT service overall install result:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Overall Install value in the properties grid to access the drop-down menu.
3.
Select either Continue overall install if service fails to install or Fail overall install if service fails to install as this
property's value.
1034
Description
Logs the error and continues with service startup.
Logs the error, displays an error message, and continues with service startup.
Logs the error (if possible) and restarts the system with the last configuration
known to be good. If the last-known-good configuration is the one that caused the
error, fail the startup.
ADS-0950-UG00
AdminStudio 9.5 User Guide
Advertisement
Table of Contents
Troubleshooting
