Setting the NT Service Start Type
Task:
To set the NT service start type:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Start Type value in the properties grid to access the drop-down menu.
3.
Select the desired Start Type from the following possible values:
Option
Automatic
Manual
Disabled
Start at Boot Time
Started by the System
Setting NT Service Start Name and Password
Task:
To set the NT service start name and password:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Start Name value in the properties grid and provide the name under which this service
will run.
3.
Click the current Password value in the properties grid and provide the password associated with the Start
Name.
Setting the NT Service Type
Task:
To set the NT service type:
1.
Select NT Services from the checklist. The NT Services View opens.
2.
Double-click the current Service Type value in the properties grid to access the drop-down menu.
3.
Select the desired Start Type from the following possible values:
AdminStudio 9.5 User Guide
Description
The service starts during system startup.
The service is only started when the service control manager calls the
StartService function.
The service is not started.
The driver is started by the operating system loader. (Device driver only)
The driver is started by calling the IoInitSystem function. (Device driver only)
ADS-0950-UG00
Chapter 12: Customizing Installations Using Tuner
Configuring Package Content
1035