Novell ADMINSTUDIO 9.5 User Manual page 486

Chapter 7: Repackaging Legacy Installations Using the Repackaging Wizard
Repackaging Legacy Installations Using the Repackaging Wizard
3. Select the Installation Monitoring method.
The InstallShield Professional Logging Method is not offered as a choice on this panel, but when you
select an InstallShield Editor or DevStudio 9.x InstallScript installation on the Collect Product Information
Panel (the next panel in the Repackaging Wizard), Repackager will automatically detect the InstallScript
installation and will display the InstallShield Professional Setup Panel. On this panel you can choose to
use the InstallShield Professional Logging Method instead of the method you chose on the Method
Selection Panel.
Caution •
you are permitted to select either Installation Monitoring or Snapshot on the Method Selection Panel, but it
is recommended that you select Installation Monitoring.
If you select the Snapshot method, an additional panel opens, entitled Snapshot Method. On this panel, if you
select Multiple Steps instead of Single Step, Repackager will not recognize the setup as an InstallShield
Editor or DevStudio 9.x InstallScript installation and the InstallShield Professional Setup Panel will not
open. You can avoid this extra and possibly troublesome step by selecting Installation Monitoring on the
Method Selection Panel.
4. On the Method Selection Panel, click Next. The Collect Product Information Panel opens.
486
When you are attempting to repackage a setup using the InstallShield Professional Logging Method,
ADS-0950-UG00 AdminStudio 9.5 User Guide