Warning -9134: Failure To Extract Icon From Executable; Error -9135: Shortcut Target Is 16-Bit - Novell ADMINSTUDIO 9.5 User Manual

Table 9-99 • Warning -9133: Shortcut Icon Not Found
Category
Message:
Cause:
Resolution:

Warning -9134: Failure to Extract Icon from Executable

The following table documents this message:
Table 9-100 • Warning -9134: Failure to Extract Icon from Executable
Category
Type:
Message:
Cause:
Resolution:

Error -9135: Shortcut Target is 16-Bit

The following table documents this message:
Table 9-101 • Error -9135: Shortcut Target is 16-Bit
Category
Type:
Message:
Cause:
Resolution:
AdminStudio 9.5 User Guide
Chapter 9: Converting Windows Installer Packages to Virtual Applications
Description
No icon found for 'ShortcutName' shortcut. Using generic Windows application icon
instead.
If no icon can be loaded for this shortcut, the generic Windows application icon is used. This can
happen if the file used is corrupt or if extracting an image from it is not possible.
Modify the shortcut to use a different icon.
Description
Warning
Failed to extract icon from executable 'filename'. Make sure the executable is not
corrupt.
A corrupt icon file may cause this warning.
Modify the shortcut to use a different icon.
Description
Error
The target for shortcut 'ShortcutName' is 16-bit. This application may not
function properly in the Citrix Isolation Environment.
The file this shortcut points to is a 16-bit application.
Replace file with a newer 32-bit version. Can also test and see if the application works
properly in the Citrix environment.
ADS-0950-UG00
Windows Installer Converter Reference
733