Excluding Sections From .Ini Files - Novell ADMINSTUDIO 9.5 User Manual

5. If there are specific sections you want to exclude from the
separate them with pipes (
asterisk (*) in the Excluded Sections field.
6. Click OK to close the INI File Exclusion Information dialog box. The new exclusion appears in the list on
the INI Files tab.
7. Save the exclusions file as described in
Note • When configuring .ini file exclusions for Repackager, you are only configuring Repackager to automatically
mark the .ini file and/or sections as excluded; this can be changed from within Repackager on an .ini file by .ini file
basis. However, when configuring .ini file exclusions for the OS Snapshot Wizard, .ini files in the exclusion list are not
captured in the OS snapshot file.

Excluding Sections from .ini Files

To add a specific .ini file section to the exclusion list, perform the following steps.
Task: To add a specific .ini file section to the exclusion list:
1. Launch the Exclusions Editor and open an exclusions file by performing the steps listed in
Exclusions
2. Open the INI Files tab.
3. Click New. The INI File Exclusion Information dialog box opens.
4. Enter or browse to the
5. To exclude a specific
If there are multiple sections, separate them with pipes (
6. Click OK to close the INI File Exclusion Information dialog box. The new exclusion appears in the INI Files
and Sections Excluded During Analysis dialog box.
7. Click OK to close the INI File Exclusion Information dialog box. The new exclusion appears in the list on
the INI Files tab.
8. Save the exclusions file as described in
Note • When configuring .ini file exclusions for Repackager, you are only configuring Repackager to automatically
mark the .ini file and/or sections as excluded; this can be changed from within Repackager on an .ini file by .ini file
basis. However, when configuring .ini file exclusions for the OS Snapshot Wizard, .ini files in the exclusion list are not
captured in the OS snapshot file.
AdminStudio 9.5 User Guide
Chapter 8: Converting Legacy Installations Using the Repackager Interface
) in the Excluded Sections field. If you want to exclude all sections, put an
|
Editor:
file containing the section you want to exclude.
.ini
file section, enter the section name in brackets ([]) in the Excluded Sections field.
.ini
ADS-0950-UG00
file, put the section names in brackets ([]) and
.ini
Launching Exclusions Editor.
).
|
Launching Exclusions Editor:
Configuring Exclusions
Launching
565