Novell ADMINSTUDIO 9.5 User Manual page 919

Table 10-44 • [BuildOptions] Section of package.ini (cont.)
Option
SandboxNetworkDrives
SandboxRemovableDisk
RemoveSandboxOnExit
AdminStudio 9.5 User Guide ADS-0950-UG00
Chapter 10: Creating Customized Virtual Applications
Description
Enable this option if you want changes to data on Network-mapped
drives to go into the sandbox. By default, the ThinApp application
can read and write to network mapped drives with no changes. The
value for SandboxNetworkDrives is set to either 0 (off) or 1 (on).
SandboxNetworkDrives=0
Note • This option corresponds to the
Changes go to Sandbox
Enable this option if you want changes to data on Removable disk
(floppy/flash) to go into the sandbox. By default the application can
read and write to removable disk with no changes. The value for
SandboxRemovableDisk can be set to either 0 (off) or 1 (on).
SandboxRemovableDisk=0
Note • This option corresponds to the
to Sandbox General Settings
option on the
Enable this option if you want to delete the sandbox when the
ThinApp application exits. This resets the application to its original
captured state If the application spawns child processes, the clean
up will be postponed until all have quit. The value for
RemoveSandboxOnExit can be set to either 0 (off) or 1 (on).
RemoveSandboxOnExit=0
Note • This option corresponds to the
General Settings
on the page.
Creating ThinApp Applications
Mapped Network Drive
General Settings
option on the
Removable Disk Changes go
page.
Reset Sandbox on Exit
page.
option
919