Novell ADMINSTUDIO 9.5 User Manual page 628

Chapter 8: Converting Legacy Installations Using the Repackager Interface
Repackager Interface Reference
Table 8-28 • Options.ini File/General Section Properties (cont.)
Properties
SmartScannedOnce
UseAdvertisedShortcuts
UseHKCUProxy
UseLanguage
UseMergeModules
UseSrcFolder
[IgnoreShortcuts] Section
Shortcuts that refer to executables listed in this section will be ignored during conversion.
Options.ini File Defaults
This section lists the default settings in the
[MMExclusions]
[General]
UseSrcFolder=Y
EnablePathVariables=Y
UseHKCUProxy=N
LimitedUI=Y
SISAuthor=InstallShield Repackager
OtherFilesNewComponents=N
UseMergeModules=Y
SharedCommonFiles=Y
628
Description
Specifies whether or not the SmartScan Wizard was run for this
project.
This option is set to N by default.
Create advertised shortcuts where applicable.
This option is set to Y by default.
Set this option to Y to copy all registry entries in
HKEY_CURRENT_USER to HKEY_USERS\.default.
This option is set to N by default.
When selected, the target package's language will be the language
detected by Repackager (as displayed in the Captured Installation
view).
This option is set to N by default.
Set this option to Y to replace files with merge modules whenever
possible during conversion. Exceptions are listed under the
[MMExclusions] section.
This option is set to Y by default.
Set this option to Y to make the InstallShield Editor project (
folder default to the Repackager output project (
This option is set to Y by default.
file that is shipped with Repackager:
Options.ini
.inc
ADS-0950-UG00 AdminStudio 9.5 User Guide
)
.ism
) folder.