Chapter 8: Converting Legacy Installations Using the Repackager Interface
Isolating Windows Installer Packages
Specifying the Assembly Naming Conventions
On the Manifest Options tab of the
Options from the Tools menu, you can specify the type of naming conventions Repackager will use when creating
assemblies.
Task:
To set the default naming convention for assemblies:
1.
Open the Repackager interface.
2.
From the Tools menu, select Isolation Options. The Manifest Options tab of the Isolation Options dialog
box opens.
3.
In the Assembly Naming Conventions area, enter your Company name and Division. These two fields
create the default assembly naming convention (in the form
number).
4.
If you want to create a new component for each assembly, select the Create new component for each
assembly option.
Assemblies created during application isolation will follow the naming convention as specified.
Note •
The modifications you make on the Isolation Options dialog box will be recorded in the
isolationconfig.ini
Setting Digital Signature Options for Shared Assemblies
You can configure the certificate information required when using shared assemblies on the Digital Signature tab
of the Isolation Options dialog box.This required digital signature provides an extra layer of protection, allowing
you to obtain information about the company who created a global assembly.
Note •
The modifications you make on the Isolation Options dialog box will be recorded in the
isolationconfig.ini
Note •
For more information, see
Task:
To set digital signature options:
1.
Open the Repackager interface.
2.
From the Tools menu, select Isolation Options. The Manifest Options tab of the Isolation Options dialog
box opens.
552
Isolation Options Dialog
file, which is stored in the
file, which is stored in the
About Digital
Box, which is opened by selecting Isolation
Company.Division.Assembly
directory.
AdminStudio Shared
directory.
AdminStudio Shared
Certificates.
ADS-0950-UG00
followed by a
AdminStudio 9.5 User Guide