Table of Contents
Advertisement
Web Interface Procedure: Assigning a MAC-Based VLAN
To use the Web interface to configure the managed switch, proceed as follows:
1.
Create VLAN 3.
a.
From the main menu, select Switching > VLAN >Basic > VLAN configuration. A screen similar to
the following displays.
Figure 4-10
b. Enter the following information in the VLAN Configuration.
•
In the VLAN ID field, enter 3
•
In the VLAN Name field, enter VLAN3
•
Select Static from the VLAN Type pull-down menu.
c.
Click Add
2.
Assign ports to VLAN 3.
a.
From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 4-11
Virtual LANs
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
4-11
Advertisement
Table of Contents
