Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
Starting the Web Interface
Follow these steps to start the switch Web interface:
1.
Enter the IP address of the switch in the Web browser address field.
2.
When the Login panel is displayed click Login.
3.
Enter the appropriate user name and password. The user name and associated password are the same as
those used for the terminal interface. Click the Login button.
4.
The System Description Menu displays, with the navigation tree appearing to the left of the screen.
5.
Make a selection by clicking on the appropriate item in the navigation tree.
Web Interface Layout
The Web interface is called the Prosafe Control Center (PCC). When you use the switch's IP address to log
into the switch, the following screen displays:
Figure 3-1
The switch can accommodate two types of users: administrative users and guests. An administrative user
may configure the switch for network application, but a guest may not. The guest may only view the settings
and status of the network. As shipped from the factory, both users can log in without a password. Netgear
strongly recommends that the network administrator creates a unique password for the administrative user
before placing the switch into production.
The following screen shows an example of the PCC:
3-2
v1.0, November 2008
Using the Web Interface
Advertisement
Table of Contents
