NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
•
In the Priority field, enter 128.
•
In the Metric Cost field, enter 32.
d. Click Apply to save the settings.
5.
Enable OSPF on the VLAN 20.
a.
From the main menu, select Routing > OSPF > Advanced>Interface Configuration. A screen
similar to the following displays.
Figure 9-49
b. Under the Interface Configuration, click the VLANS to show all the VLAN interfaces.
c.
Under IP Interface Configuration, scroll down to interface 0/2/2 and select the checkbox for that
interface. 0/2/2 now appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.3.
•
Select the Enable from the OSPF Admin Mode pull-down menu.
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
d. Click Apply to save the settings.
9-42
v1.0, November 2008
OSPF