NETGEAR FSM726E-100NAS Administration Manual page 187

a. Select acl_bpdu from the ACL Name pull-down menu.
b. Enter the following information in the Rule Table.
• In the ID field, enter 2.
• Select the Permit from the Action pull-down menu.
c. Click the Add button.
4. Apply the ACL acl_bpdu to the port 2.
a. From the main menu, select Security > ACL >MAC ACL> MAC Binding Configuration. A screen
similar to the following displays.
Figure 12-47
b. Enter the following information in the MAC Binding Configuration.
• Select the acl_bpdu from the ACL ID pull-down menu.
• In the Sequence Number field, enter 1.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 2. A flag appears in the box.
e. Click Apply to save the settings.
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
12-41