NETGEAR FSM726E-100NAS Administration Manual page 84

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
a. From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Figure 8-3
b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. 1/0/2 now appears in the Interface field at the top.
c. Under the IP Interface Configuration, enter the following information.
• In the IP Address field, enter 192.150.2.1.
• In the Subnet Mask field, enter 255.255.255.0.
• Select Enable from Routing Mode pull-down menu.
d. Click Apply to save the settings.
2. Assign IP address 192.150.3.1/24 to the interface 1/0/3.
8-4
v1.0, November 2008
Routing Information Protocol