d. Click Apply to save settings.
7.
Configure RADIUS authentication server.
a.
From the main menu, select Security > Management Security > Server Configuration. A screen
similar to the following displays.
Figure 16-19
b. In the Server Address, enter 10.100.5.17.
c.
Select the Yes from the Secret Configured pull-down menu.
d. In the Secret field, enter 123456.
e.
Select the Yes from the Primary Server pull-down menu.
f.
Select Enable from the Message Authenticator pull-down menu.
g.
Click Add.
8.
Enable Accounting.
a.
From the main menu, select Security > Management Security > RADIUS> Radius Configuration.
A screen similar to the following displays.
Figure 16-20
Security Management
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
16-19