NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
4.
Enable IP Routing:
a.
From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the
following displays.
Figure 16-9
b. Under IP Configuration, make the following selections:
•
Next to Routing Mode, select the Enable radio button.
•
Next to IP Forwarding Mode, select the Enable radio button.
c.
Click Apply to enable IP Routing.
5.
Configure default route for VLAN 202:
a.
From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Figure 16-10
b. Under Configure Routes, select DefaultRoute from the Route Type pull-down menu.
c.
Under Configure Routes, in the Next Hop IP Address field, enter 10.100.5.252.
16-12
v1.0, November 2008
Security Management