NETGEAR FSM726E-100NAS Administration Manual page 241

a. From the main menu, select Security > Traffic Control >Port Security->Port Administrator. A
screen similar to the following displays.
Figure 16-1
b. Under Port Security Configuration, next to the Port Security Mode, select Enable radio button.
c. Click Apply to save the settings.
2. Set dynamic and static limit on the port 1/0/1
a. From the main menu, select Security > Traffic Control >Port Security->Interface Configuration. A
screen similar to the following displays.
Figure 16-2
b. Under Port Security Interface Configuration, scroll down to interface 1/0/1 and select the checkbox
for 1/0/1. 1/0/1 now appears in the Interface field at the top.
c. Enter the following information in the Interface Configuration.
• Select the Enable from the Port Security pull-down menu
• In the Max Allowed Dynamically Learned MAC field, enter 10
• In the Max Allowed Statically Locked MAC filed, enter 3
Security Management
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3
v1.0, November 2008
16-3