Firmware Versions Screen - Cisco CP-7942G Software Manual

Status Menu
Table 7-3
Item
Port 2
IPv4

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Step 1
Select Status.
Step 2
Select Firmware Versions.
Step 3
To exit the Firmware Version screen, press the Exit softkey.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
7-10
Chapter 7
Network Statistics Message Information (continued)
Table 7-4 describes the information that is displayed on this screen.
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Description
Link state and connection of the Network port
Information on the DHCP status. This includes the following
states:
CDP BOUND
•
CDP INIT
•
DHCP BOUND
•
DHCP DISABLED
•
DHCP INIT
•
DHCP INVALID
•
• DHCP REBINDING
• DHCP REBOOT
• DHCP RENEWING
DHCP REQUESTING
•
DHCP RESYNC
•
DHCP UNRECOGNIZED
•
DHCP WAITING COLDBOOT TIMEOUT
•
SET DHCP COLDBOOT
•
SET DHCP DISABLED
•
DISABLED DUPLICATE IP
•
SET DHCP FAST
•
OL-15483-01