Trust List Menu; 802.1X Authentication And Status - Cisco CP-7942G Software Manual

Security Configuration Menu

Trust List Menu

The Trust List menu displays information about all of the servers that the phone trusts and includes the
options described in
If a CTL file is installed on the phone, you can access the Trust List menu by pressing the Settings button
and choosing Security Configuration > Trust List.
To exit the Trust List menu, press the Exit softkey.
Table 4-21 Trust List Menu Settings
Option Description
CAPF Server IP address of the CAPF used by the phone. Also
displays a certificate icon
is installed for this server.
Unified CM/TFTP IP address of a Cisco Unified Communications
Server Manager and TFTP server used by the phone.
Also displays a certificate icon
certificate is installed for this server.
SRST Router IP address of the trusted SRST router that is
available to the phone, if such a device has been
configured in Cisco Unified Communications
Manager Administration. Also displays a
certificate icon
for this server.

802.1X Authentication and Status

The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X
authentication and monitor its progress. These options are described in
You can access the 802.1X Authentication settings by pressing the Settings button and choosing
Security Configuration > 802.1X Authentication and Security Configuration > 802.1X
Authentication Status.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-30
Table 4-21.
if a certificate
if a
if a certificate is installed
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
For more information about this file, refer to the
"Configuring the Cisco CTL Client" section in
Cisco Unified Communications Manager Security
Guide.
For more information about this file, refer to the
"Configuring the Cisco CTL Client" section in
Cisco Unified Communications Manager Security
Guide.
For more information about this file, refer to the
"Configuring the Cisco CTL Client" section in
Cisco Unified Communications Manager Security
Guide.
Table 4-22 and Table 4-23.
OL-15483-01