Managing The User Options Web Pages; Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco CP-7942G Software Manual

Chapter 5 Configuring Features, Templates, Services, and Users
•
•
You can add users to Cisco Unified Communications Manager using either of these methods:
•
•

Managing the User Options Web Pages

From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco Unified IP Phone 7962G and
7942G Phone Guide.

Giving Users Access to the User Options Web Pages

Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group: choose User Management > User Groups.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
"End User Configuration" section.

Specifying Options that Appear on the User Options Web Pages

Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
•
•
•
The settings apply to all User Options web pages at your site.
Note
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System > Enterprise
Step 1
Parameters.
OL-15483-01
Set up speed dial and call forwarding numbers.
Subscribe to services that are accessible from a Cisco Unified IP Phone.
To add users individually, choose User Management > End User from Cisco Unified
Communications Manager Administration.
Refer to the Cisco Unified Communications Manager Administration Guide for more information
about adding users. Refer to the Cisco Unified Communications Manager System Guide for details
about user information.
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for details.
Show Ring Settings
Show Line Text Label Settings
Show Call Forwarding
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
Managing the User Options Web Pages
5-19