Firmware Versions Screen - Cisco 7962G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3
Item
Port 2
DHCP BOUND

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Select Firmware Versions.
Step 3
To exit the Firmware Version screen, press the Exit softkey.
Table 7-4
Item
Load File
App Load ID
JVM Load ID
OS Load ID
Boot Load ID
Expansion Module 1
Expansion Module 2
DSP Load ID
OL-12641-01
Network Statistics Message Information
Description
Link state and connection of the Network port
Phone is bound to the DHCP server, DHCP
parameters are acceptable, and the phone has
received a DHCPACK message.
Table 7-4 describes the information that is displayed on this screen.
Firmware Version Information
Description
Load file running on the phone
Identifies the JAR file running on the phone
Identifies the Java Virtual Machine (JVM) running
on the phone
Identifies the operating system running on the phone
Identifies the factory-installed load running on the
phone
Identifies the load running on the Expansion
Module(s), if connected to the phone
Identifies the digital signal processor (DSP)
software version used
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
Status Menu
7-11