Firmware Versions Screen - Cisco IP Phone Administration Manual

Status Menu
Table 8-3
Item
IPv6

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, follow these steps:
Procedure
Step 1 Press the Settings button
Select Status
Step 2
Select Firmware Versions
Step 3
To exit the Firmware Version screen, press the Exit softkey.
Step 4
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
8-12
Chapter 8
Network Statistics Message Information (continued)
Table 8-4 describes the information that is displayed on this screen.
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phones
Description
Information on the DHCPv6 status. This includes the
following states:
DHCP6 BOUND;
•
DHCP6 DISABLED
•
DHCP6 RENEW
•
DHCP6 REBIND
•
DHCP6 INIT
•
DHCP6 SOLICIT
•
DHCP6 REQUEST
•
• DHCP6 RELEASING
DHCP6 RELEASED
•
DHCP6 DISABLING
•
DHCP6 DECLINING
•
DHCP6 DECLINED
•
DHCP6 INFOREQ
•
• DHCP6 INFOREQ DONE
DHCP6 INVALID
•
DHCP6 DECLINED DUPLICATE IP
•
DHCP6 WAITING COLDBOOT TIMEOUT
•
DHCP6 TIMEOUT USING RESTORED VAL
•
DHCP6 TIMEOUT. CANNOT RESTORE
•
• STACK TURNED OFF
OL-23091-01