Configuring Softkey Templates - Cisco CP-7942G Software Manual

Chapter 5 Configuring Features, Templates, Services, and Users
•
•
•
Step 4 Click Save.
You can add, update, or delete service parameters as needed as described in "IP Phone Service
Parameter" chapter in the Cisco Unified Communications Manager Administration Guide.
To modify a phone button template for PAB or Fast Dial, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose Device > Device Settings >
Step 1
Phone Button Template.
Click Find.
Step 2
Select the phone model.
Step 3
Click Copy, enter a name for the new template, and then click Save.
Step 4
The Phone Button Template Configuration window opens.
Step 5 Identify the button you would like to assign, and select Service URL from the Features drop-down list
box associated with the line.
Click Save to create a new phone button template using the service URL.
Step 6
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list box.
Step 9 Click Save to store the change and then click Reset to implement the change.
The phone user can now access the User Options pages and associate the service with a button on the
phone.
For additional information on IP phone services, see the Cisco Unified Communications Manager
Administration Guide, "IP Phone Services Configuration" chapter. For additional information on
configuring line buttons, see the Cisco Unified Communications Manager Administration Guide, "Cisco
Unified IP Phone Configuration" chapter, "Configuring Speed-Dial Buttons" section.

Configuring Softkey Templates

Using Cisco Unified Communications Manager Administration, you can manage softkeys associated
with applications that are supported by the Cisco Unified IP Phone 7962G and 7942G.
Cisco Unified Communications Manager supports two types of softkey templates: standard and
OL-15483-01
http://<Unified-CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd
Service Category—Select XML Service.
Service Type—Select Directories.
Enable—Select the check box.
Note If you change the service URL, remove an IP phone service parameter, or change the name
of a phone service parameter for a phone service to which users are subscribed, you must
click Update Subscriptions to update all currently subscribed users with the changes, or
users must resubscribe to the service to rebuild the correct URL.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
Configuring Softkey Templates
5-17