Cisco CP-7942G Software Manual page 74

Network Configuration Menu
Table 4-3 IPv4 Configuration Menu Options (continued)
Option
Subnet Mask
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
DHCP
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-8
Description
Subnet mask used by the phone.
Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5).
Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–5)
used by the phone.
Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns the
phone an IP address. When DHCP is disabled, the
administrator must manually assign an IP address to the
phone.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration
1.
options.
Set the DHCP Enabled option to
2.
No.
Scroll to the Subnet Mask
3.
option, press the Edit softkey,
and then enter a new subnet
mask.
Press the Validate softkey and
4.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP Enabled option to
2.
No.
Scroll to the appropriate Default
3.
Router option, press the Edit
softkey, and then enter a new
router IP address.
4. Press the Validate softkey.
Repeat Steps 3 and 4 as needed
5.
to assign backup routers.
6. Press the Save softkey.
Unlock network configuration
1.
options.
2. Set the DHCP Enabled option to
No.
3. Scroll to the appropriate DNS
Server option, press the Edit
softkey, and then enter a new
DNS server IP address.
Press the Validate softkey.
4.
Repeat Steps 3 and 4 as needed
5.
to assign backup DNS servers.
Press the Save softkey.
6.
Unlock network configuration
1.
options.
Scroll to the DHCP Enabled
2.
option and press the No softkey
to disable DHCP, or press the
Yes softkey to enable DHCP.
Press the Save softkey.
3.
OL-15483-01