Cisco CP-7942G Software Manual page 105

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Distinctive ring Users can customize how their phone indicates an
incoming call and a new voice mail message.
Do Not Disturb (DND) When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone to have a softkey
template with a DND softkey or a phone-button
template with DND as one of the selected features.
The following DND-related parameters are
configurable in Cisco Unified Communications
Manager Administration:
Extension Mobility Allows a user temporarily to apply a phone number
Service and user profile settings to a shared Cisco Unified
IP Phone by logging into the Extension Mobility
service on that phone.
Extension Mobility can be useful if users work
from a variety of locations within your company or
if they share a workspace with coworkers.
OL-15483-01
Do Not Disturb—This check box allows you to
•
enable DND on a per-phone basis. Use Cisco
Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
DND Option—Choose "Call Reject" (to turn
•
off all audible and visual notifications), or
"Ringer Off" (to turn off only the ringer). DND
Option appears on both the Common Phone
Profile window and the Phone Configuration
window (Phone Configuration window value
takes precedence).
DND Incoming Call Alert—Choose the type
•
of alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
page and the Phone configuration page (Phone
Configuration window value takes
precedence).
BLF Status Depicts DND—Enables DND
•
status to override busy/idle state.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Custom Phone Rings"
chapter.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, "Do Not Disturb" chapter.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Cisco Unified
Communications Manager Extension
Mobility" chapter.
5-7