Cisco CP-7942G Software Manual page 36

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-7 Installation Checklist of the Cisco Unified IP Phone 7962G and 7942G (continued)
Task Purpose
Monitor the phone startup process.
4.
Adds primary and secondary directory numbers and
features associated with directory numbers to the
phone.
Verifies that phone is configured properly.
If you are configuring the network settings on the
5.
phone, you can set up an IP address for the phone by
either using DHCP or manually entering an IP
address.
Using DHCP—To enable DHCP and allow the DHCP
server to automatically assign an IP address to the
Cisco Unified IP Phone and direct the phone to a
TFTP server, choose Settings > Network
Configuration> IPv4 Configuration and:
To enable DHCP, set DHCP Enabled to Yes.
•
DHCP is enabled by default.
To use an alternate TFTP server, set Alternate
•
TFTP Server to Yes, and enter the IP address for
the TFTP Server.
Consult with the network administrator to
Note
determine whether you need to assign an
alternative TFTP server instead of using the
TFTP server assigned by DHCP.
Without DHCP—You must configure the IP address,
subnet mask, TFTP server, and default router locally
on the phone, choose Settings > Network
Configuration> IPv4 Configuration:
To disable DHCP and manually set an IP address:
To disable DHCP, set DHCP Enabled to No.
a.
Enter the static IP address for phone.
b.
Enter the subnet mask.
c.
Enter the default router IP addresses.
d.
Set Alternate TFTP Server to Yes, and enter the IP
e.
address for TFTP Server 1.
You must also enter the domain name where the phone
resides by Choosing Settings > Network
Configuration.
Set up security on the phone.
6.
Provides protection against data tampering threats and
identity theft of phones.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
1-22
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
See the "Verifying the Phone Startup Process" section on
page 3-11.
See the "Configuring Startup Network Settings" section
on page 3-12.
See the "Network Configuration Menu" section on
page 4-5.
See the "Configuring Security on the Cisco Unified IP
Phone" section on page 3-13.
OL-15483-01