Cisco CP-7942G Software Manual page 109

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Onhook predialing Allows a user to dial a number without going off
hook. The user can then either pick up the handset
or press the Dial softkey.
Other group pickup Allows a user to answer a call ringing on a phone
in another group that is associated with the user's
group.
Presence-enabled Allows a user to monitor the call state of another
directories directory number (DN) listed in call logs,
speed-dials, and corporate directories. The Busy
Lamp Field (BLF) for the DN displays the call
state.
Private Line The Cisco Unified Communications Manager
Automated Ringdown administrator can configure a phone number that
(PLAR) the Cisco Unified IP Phone dials as soon as the
handset goes off hook. This can be useful for
(SIP phones only)
phones that are designated for calling emergency
or "hotline" numbers.
Privacy Prevents users who share a line from adding
themselves to a call and from viewing information
on their phone screens about the call of the other
user.
Programmable line The administrator can assign features to line
keys (PLK) buttons. Softkeys normally control these features;
for example, New Call, Call Back, End Call, and
Forward All. When the administrator configures
these features on the line buttons, they always
remain visible, so users can have a "hard" New
Call key.
Protected calling Provides a secure (encrypted) connection between
two phones. A security tone is played at the
beginning of the call to indicate that both phones
are protected. Some features, such as conference
calling, shared lines, Extension Mobility, and Join
Across Lines are not available when protected
calling is configured. Protected calls are not
authenticated.
OL-15483-01
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the Cisco
Unified IP Phone 7962G Phone Guide, "Basic
Call Handling" chapter.
For more information refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Call Pickup" chapter.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, "Presence" chapter.
Refer to the Cisco Unified Communications
Manager System Guide, "SIP Dial Rules
Configuration" chapter.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide "Barge and
Privacy" chapter.
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Administration Guide, "Phone Button
Template Configuration" chapter
• Cisco Unified Communications Manager
Administration Guide, "Modifying Phone
Button Templates".
For more information about security, see the
"Overview of Supported Security Features"
section on page 1-10.
For additional information, refer to these:
Cisco Unified Communications Manager
•
Security Guide.
5-11