Table of Contents
Advertisement
Table 2-5. Setup Wizard Step 5: Email Security Settings (continued)
Setting
IMAP
Scan Exceptions
The default maximum file or message size that is scanned is 2048 KB, but you can define a maximum size
of up to 10240 KB. However, setting the maximum size to a high value might affect the UTM's performance
(see
"Performance Management" on page
From the pull-down menu, specify one of the following actions when the file or message exceeds the
maximum size:
• Skip. The file is not scanned but skipped, leaving the end user vulnerable. This is the default setting.
• Block. The file is blocked and does not reach the end user.
Setup Wizard Step 6 of 10: Web Security
Figure 2-12
Enter the settings as explained in
screen.
Using the Setup Wizard to Provision the UTM in Your Network
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
From the IMAP pull-down menu, specify one of the following actions when an
infected e-mail is detected:
• Delete attachment. This is the default setting. The e-mail is not blocked, but
the attachment is deleted, and a log entry is created.
• Log only. Only a log entry is created. The e-mail is not blocked and the
attachment is not deleted.
10-1).
Table 2-6 on page
v1.0, January 2010
2-20, then click Next to go the following
2-19
Advertisement
Table of Contents
Troubleshooting
