Automatically Detecting And Connecting - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual

Automatically Detecting and Connecting

To automatically configure the WAN ports for connection to the Internet:
Figure 2-3
1. Select Network Configuration > WAN Settings from the menu. The WAN Settings tabs
appear, with the WAN1 ISP Settings screen in view.
2. Click Auto Detect at the bottom of the menu. Auto Detect will probe the WAN port for a
range of connection methods and suggest one that your ISP appears to support.
Note: When you click Auto Detect while the WAN port already has a connection,
you might lose the connection because the VPN firewall will enter its
detection mode.
Connecting the FVS336G to the Internet
v1.0, January 2010
2-5