Creating A Lan Wan Outbound Services Rule - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
To change the default outbound policy, follow these steps:
1. Go to the LAN WAN Rules screen, shown in
2. Change the Default Outbound Policy by selecting Block Always from the pull-down menu.
3. Click Apply.

Creating a LAN WAN Outbound Services Rule

An outbound rule will block or allow the selected application from an internal IP LAN address to
an external WAN IP address according to the schedule created on the Schedule screen. You can
also tailor these rules to your specific needs (see
Note: This feature is for advanced administrators only! Incorrect configuration will cause
serious problems.
To create a new outbound service rule in the LAN WAN Rules screen:
1. Click Add under the Outbound Services table. The Add LAN WAN Outbound Service screen
is displayed.
Figure 4-2
Firewall Protection and Content Filtering
Figure 4-1 on page
"Administrator Tips" on page
v1.0, January 2010
4-8.
4-33).
4-9