Managing The Configuration File - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
– To make the VPN firewall globally accessible using the community string, but still
receive traps on the host, enter 0.0.0.0 as the subnet mask and an IP address for where
the traps will be received.
b. Enter the trap port number of the configuration in the Port field. The default is 162.
c. Enter the trap community string of the configuration in the Community field.
3. Click Add to create the new configuration. The entry is displayed in the SNMP
Configuration table.
To modify an SNMP configuration, click Edit in the Action column adjacent to the entry that you
wish to modify.
To modify the SNMP identification information:
1. The SNMP System Info option arrow at the top of the tab opens the SNMP
SysConfiguration screen that displays the SNMP system contact information available to the
SNMP manager.
Figure 8-5
2. Modify any of the information that you want the SNMP Manager to use. You can edit the
system contact, system location, and system name.
3. Click Apply to save your settings.

Managing the Configuration File

The configuration settings of the VPN firewall are stored within the firewall in a configuration file.
This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
8-14 VPN Firewall and Network Management
v1.0, January 2010