Monitoring Vpn Firewall Statistics - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Table 9-3. Router Status Information (continued)
Item Description
WAN1 Configuration • WAN Mode: Single, Dual, or Rollover.
• WAN State: UP or DOWN.
• NAT: Enabled or Disabled.
• Connection Type: Static IP, DHCP, PPPoE, or PPTP.
• Connection State: Connected or Disconnected.
• WAN IP Address: The IP address of the WAN interface.
• Subnet Mask: The IP subnet mask of the WAN interface.
• Gateway: The gateway IP address for the WAN interface.
• Primary DNS: The IP address of the primary DNS server for the WAN interface.
• Secondary DNS: The IP address of the secondary DNS server for the WAN
• MAC Address: The MAC address of the WAN interface.
WAN2 Configuration Displays the same details as for the WAN1 Configuration.

Monitoring VPN Firewall Statistics

To display the VPN firewall statistics:
1. Select Monitoring > Router Status from the menu. The Router Status screen is displayed.
2. Click the Show Statistics link in the upper right-hand section of the screen. The Router
Statistics screen is displayed.
Figure 9-5
For each interface, the number of transmitted and received packets, the number of collided
packets, the transmitted and received Bytes per second, and the interface up-time are shown.
Monitoring System Performance
interface.
v1.0, January 2010
9-9