Viewing The Dhcp Log - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
The Known PCs and Devices table lists all current entries in the LAN Groups database. For each
PC or device, the following data is displayed
Table 9-4. Known PCs and Devices options
Item
Name
IP Address
MAC Address
Group
Note: If the VPN firewall is rebooted, the table data is lost until the VPN firewall
rediscovers the devices.

Viewing the DHCP Log

To review the most recent entries in the DHCP log:
1. Select Network Configuration > LAN Settings from the menu, and then click the LAN
Setup tab. The LAN Setup screen is displayed.
Figure 9-8
9-12
Description
The name of the PC or device. Sometimes, this can not be determined, and will be
listed as Unknown. In this case, you can edit the entry to add a meaningful name.
The current IP address. For DHCP clients, where the IP address is allocated by the
DHCP Server in this device, this IP address will not change. Where the IP address
is set on the PC (as a fixed IP address), you may need to update this entry
manually if the IP address on the PC is changed.
The MAC address of the PC. The MAC address is a low-level network identifier
which is fixed at manufacture.
Each PC or device must be in a single group. The Group column indicates which
group each entry is in. By default, all entries are in the Group1.
v1.0, January 2010
Monitoring System Performance