ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
10. If you are connecting to another NETGEAR VPN firewall, use the VPN Wizard to configure
the second VPN firewall to connect to the one you just configured.
After both firewalls are configured, go to VPN > IPsec VPN > Connection Status to display the
status of your VPN connections.
Figure 5-6
The tunnel will automatically establish when both the local and target gateway policies are
appropriately configured and enabled,
Note: When using FQDN, if the dynamic DNS service is slow to update their servers
when your DHCP WAN address changes, the VPN tunnel will fail because the
FQDN does not resolve to your new address. If you have the option to
configure the update interval, set it to an appropriately short time.
Creating a Client to Gateway VPN Tunnel
Figure 5-7
5-6
Virtual Private Networking Using IPsec
v1.0, January 2010