NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual page 142

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
4. Click Add.
The "Operation Successful" message appears at the top of the tab, and the newly-added
resource name appears on the Defined Resource Addresses table.
5. Adjacent to the new resource, click the Edit button. The Add Resource Addresses screen is
displayed.
Figure 6-7
6. From the Object Type pull-down menu, select one of the following:
• IP Address. Enter an IP address or fully qualified domain name in the IP Address/Name
field.
• IP Network. Enter the IP network address in the Network Address field. Enter the mask
length in the Mask Length (0-31) field.
7. Enter the Port Range or Port Number for the IP Address or IP Network you selected.
8. Click Apply to add the IP address or IP network to the resource. The new configuration
appears in the Defined Resource Addresses table, as shown in
6-14 Virtual Private Networking Using SSL
v1.0, January 2010
Figure 6-7.