NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual page 147

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
• If you choose IP Network, you will need to enter a descriptive Policy Name, IP Address,
Subnet Mask, then choose the Service and relevant Permission from the pull-down
menus.
Figure 6-12
• If you choose All Addresses, you will need to enter a descriptive Policy Name, then
choose the Service and relevant Permission from the pull-down menus.
Figure 6-13
5. When you are finished making your selections, click Apply. The Policies screen reappears.
Your policy goes into effect immediately and is added to the policies in the List of SSL VPN
Policies table on this screen.
Note: In addition to configuring SSL VPN user policies, be sure that HTTPS remote
management is enabled. Otherwise, all SSL VPN user connections will be
disabled. See
Virtual Private Networking Using SSL
"Enabling Remote Management Access" on page
v1.0, January 2010
8-10.
6-19